The new A-BO-22 Ferguson Tandem Disc Harrow is a lift-type, tractor-mounted
implement designed to meet the many demands from the field for a harrow embodying
automatic draft control. It attaches to the three-point linkage of the Ferguson System
in one minute or less. The harrow can be raised for transport to and from the field, for
turning at the ends and in small plots, and to provide draft relief when traversing soft
spots and grass waterways. When the harrow is lowered for operation, the Ferguson
System provides automatic draft control.
This implement is primarily designed for seedbed preparation and for such general farm
tillage as summer fallowing, pasture renovation, mulching of stubble, soybean fodder
and corn-stalks, and for many other ground preparation practices.
Included in this manual is information on lubrication, operation, adjustments, service
and maintenance, assembly instructions and numerous illustrations of the Ferguson
Disc Harrow.
Read, study and follow these instructions to get longer life, maximum performance and
the utmost satisfaction from your new implement.
Only GENUINE FERGUSON REPAIR PARTS should be used on your FERGUSON DISC
HARROW. Those parts are designed and built to fit correctly and give maximum
service. These may be purchased from your AUTHORIZED FERGUSON DEALER.
AII FERGUSON equipment is identified by a FERGUSON name plate. If this name
plate is not attached, it is not FERGUSON equipment. Check for the name plate
before purchasing the equipment. This name plate, shown below, also supplies the
serial number, which should be noted when ordering parts.
Was this article a help? Consider supporting the Flat-Spot by becoming a Premium Member. Members get discounts with well known retailers, a cool membership packet full of goodies and your membership goes toward helping us upkeep and expand on this great archive.
